Alpha-Link MXScalable high performance DAW I/O for the pro project studio

Placehold

Alpha Link MX Downloads

Firmware v2.0 updater for Mac OS X

New in Firmware v2.0
Alpha-Link MX firmware v2.0 supports 176.4 kHz and 192 kHz sample rates.

Download Alpha Link MX Firmware 2.0
Download Software
Software Version: 2.0

Release Date: 17/12/12

Download Size: 5.2 MB

How to update
The firmware of your Alpha Link MX can be updated by using ALMX updater.app. Before the updater can be used the USB driver must be installed and your Alpha-Link devices need to be connected to your computer via USB.

Instructions:

  • Open the Silicon Labs USB Driver.dmg (included in the ALMX 2.0 package);
  • Launch and follow the instructions of the Silicon Labs VCP Driver Installer (a reboot may be required);
  • Start the ALMX updater.app;
  • Connect your Alpha Link MX devices (if not already done so) via USB to your computer and turn the devices ON;
  • Select the device you wish to update in the device selection list of the main window;
  • Select Device->Update Flash from the ALMX updater main menu;
  • Do not turn OFF or disconnect the device while updating! (failing to do so may damage your Alpha-Link MX);
  • If the device has been successfully updated cycle power to load the new firmware;
  • If there was an error during the update please do NOT turn off the device - try to update the firmware again.

Supported Units and Operating Systems

The Alpha-Link MX firmware v2.0 updater for Mac OS X works with:

  • SSL Alpha-Link MX 16-4 and 4-16
  • MAC OS X 10.6 (Snow Leopard) 32-bit and 64-bit kernel
  • MAC OS X 10.7 (Lion) 32-bit and 64-bit kernel
  • MAC OS X 10.8 (Mountain Lion) 64-bit kernel

Firmware v2.0 updater for Windows

New in Firmware v2.0
Alpha-Link MX firmware v2.0 supports 176.4 kHz and 192 kHz sample rates.

Download Alpha Link MX Firmware 2.0
Download Software
Software Version: 2.0

Release Date: 17/12/12

Download Size: 5.2 MB

How to update
The firmware of your Alpha Link MX can be updated by using SSL Alpha-Link MX Firmware v2.0.exe. During the update a USB driver will be installed and your Alpha-Link devices need to be connected to your computer via USB.

Instructions:

  • Connect your SSL Alpha Link MX devices to your computer via USB and turn the devices ON;
  • Open SSL Alpha-Link MX Firmware v2.0.exe;
  • The Alpha-Link MX USB Driver will be installed first;
  • Then the Alpha-Link Firmware updater will run.
  • Select the device you wish to update using the device selection buttons;
  • Click the “Start” button;
  • Do not turn OFF or disconnect the device while updating! (doing so may damage your Alpha-Link MX);
  • If the device has been successfully updated turn the SSL Alpha-Link MX off and then on to load the new firmware;
  • If there was an error during the update please do NOT turn off the device - try to update the firmware again.

Supported Units and Operating Systems

The SSL Alpha-Link MX Firmware v2.0 updater for Windows works with:

  • SSL Alpha-Link MX 16-4 and 4-16
  • Windows XP 32-bit and 64-bit
  • Windows Vista 32-bit and 64-bit
  • Windows 7 32-bit and 64-bit