VHD Input Specifications


Front View
Front View
 
Rear View
Front View


Physical *
Depth 200mm / 7.9 inches including front panel knobs, excluding connectors
  275mm / 10.9 inches including front panel knobs and connectors
Height 171mm / 6.75 inches
Width 35mm / 1.4 inches front/rear panels
  49mm / 1.9 inches overall width (front and rear panels are offset)
Weight 260g / 9.5 ounces
Boxed size 190mm x 290mm x 70mm / 7.5" x 11.5" x 2.5"
Boxed weight 460g / 16.5 ounces
 
* All values are approximate

 

 

Environmental
Temperature Operating: +5 to 30 deg. C
  Non-operating: –20 to 50 deg. C
  Max. gradient: 15 deg. C/hour
Relative Humidity Operating: 20 to 80 %
  Non-operating: 5 to 90 %
  Max. wet bulb: 29 deg. C (non-condensing)
Vibration Operating: < 0.2 G (3 – 100Hz)
  Non-operating, power off: < 0.4 G (3 – 100Hz)
Shock Operating: < 2 G (10ms max.)
  Non-operating: < 10 G (10ms max.)
Altitude Operating: 0 to 3000m (above sea level)
  Non-operating: 0 to 12000m

 

 

EQ Filters
  Frequency range Slope
HF (Low Pass): 20kHz – 3kHz (–3dB point) 12dB/Octave
LF (High Pass): 15Hz – 350Hz (–3dB point) 18dB/Octave

 

 

Performance Specification*
 
Microphone Amplifier Performance
Gain Continously variable from +20dB to +70dB
  Independently switchable 20dB Pad available
Input Impedance Continously variable from ≅1k2Ω to ≅10kΩ
Output Headroom > +26dBu at onset of clipping
THD + Noise (-18dBu applied, +28dB gain) < 0.2% (20Hz - 20kHz)
  With VHD, adjustable between < 0.2% and 5% (1kHz - 20kHz)
Frequency Response 20Hz to 20kHz +0.3dB
  50kHz -3dB
  150kHz –3dB
Equivalent Input Noise (input terminated with 150Ω) < –126dB at maximum gain
  < –80dB at minimum gain (with Pad ‘IN’)
Common Mode Rejection (-10dBu applied, +30dB gain) > 75dB from 50Hz to 1kHz
    > 65dB at 10kHz
 
Line Input Performance
Gain Continously variable from -24dB to +24dB
Input Impedance 10KΩ
THD + Noise (-24dBu applied, +0dB gain) < 0.05% from 20Hz to 20kHz
  -3dB at 50kHz
Frequency Response 20Hz to 20kHz +0.1dB from 20Hz to 20kHz
  50kHz –3dB
Equivalent Input Noise (Input terminated with 150Ω) -90dB
 
* See User Manual for measurement conditions & references