Specifications


Front View
 
Rear View


Physical *
Depth 325mm/12.8 inches not including heatsink
  365mm/14.3 inches including heatsink
  400mm/15.75 inches including connectors
Height 89mm/3.5 inches (2 RU)
Width 480mm/19 inches
Weight 5kg/11 pounds
Power 55 Watts/67 VA
Boxed size 520mm x 520mm x 182mm (20.5" x 20.5" x 7.2")
  12.75" x 21.75" x 3.25"
Boxed weight 7.3kg (16 pounds)
 
* All values are approximate

 

 

Environmental
Temperature Operating: +5 to 30 deg. C
  Non-operating: –20 to 50 deg. C
  Max. gradient: 15 deg. C/hour
Relative Humidity Operating: 20 to 80 %
  Non-operating: 5 to 90 %
  Max. wet bulb: 29 deg. C (non-condensing)
Vibration Operating: < 0.2 G (3 – 100Hz)
  Non-operating, power off: < 0.4 G (3 – 100Hz)
Shock Operating: < 2 G (10ms max.)
  Non-operating: < 10 G (10ms max.)
Altitude Operating: 0 to 3000m (above sea level)
  Non-operating: 0 to 12000m

 

 

Performance Specification*
 
Noise < 99dBuEIN
 
Headroom > +26dBu output level, 20Hz to 20kHz at 0dB gain
 
Dynamic Range > 125dB
 
Frequency Response
20Hz to 20kHz ±0.05dB
10Hz to 96kHz +0.2/-0.5dB
10Hz to 200kHz +0.2/-2dB
 
Common Mode Rejection Ratio (CMRR)
  Frequency CMRR (dB)
  20Hz to 10kHz > 50dB
 
THD + Noise
Gain +0dB, input level +4dBu. Master Fader switched in. Compressor switched out.
10Hz to 20kHz (80kHz filter) < 0.006%, typically 0.003%
Gain +0dB, input level +20dBu. Master Fader switched in. Compressor switched out.
10Hz to 20kHz (80kHz filter) < 0.01%, typically <0.006%
 
THD with the compressor switched in is dependent on attack and release times and signal content.
 
Crosstalk
  @ 50Hz < –105dB
  @ 1kHz < –90dB
Impedance
Input Impedance > 10k ohms
Output Impedance < 40 ohms
 
* See User Manual for measurement conditions & references